Behavior of iodine implanted in highly oriented pyrolytic graphite (HOPG) after heat treatment

The behavior of iodine implanted in highly oriented pyrolytic graphite (HOPG) has been investigated using Rutherford backscattering spectrometry (RBS), scanning electron microscopy (SEM) and X-ray diffraction (XRD). Iodine ions were implanted into HOPG using an energy of 360keV and a dose of 1×1015 atoms cm−2 at room temperature. The implanted samples were annealed in vacuum at 900°C, 1000°C, 1100°C and 1200°C, all for 9h. The results revealed that iodine was released from the HOPG at the above annealing temperatures. RBS evaluation of the full width at half maximum (FWHM) and the number of iodine atoms before and after annealing did not reveal Fickian diffusion as the mechanism by which the iodine atoms were released from the HOPG. Evaluation of (002) peak intensities using XRD revealed an increase in preferred orientation of the graphitic layers after heat treatment of 1200°C. The high resolution SEM micrographs of the HOPG samples before and after heat treatment showed no evidence of alterations on the polished surface.