High Beam Quality And High Power Diode Laser Source
ADVANCES IN MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-4(2013)
摘要
As the increasing applications of laser diodes in laser cladding and laser hardening, the single laser diode Optical power can not meet the actual requirements. An improvement of the power and Power densty necessary and it can be achieved by beam shaping and beam combination such as polarization coupling the polarization coupling technology is used to couple two laser beams with thin film plate polarizer In this paper two 880 nm vertical stacked arrays with an output power of 1600 W was achieved After fast axils and slow axis collimated, the polarization direction of one stacked arrays is rotated 90 degree through a half wave plate, thus, the polarization directions of two laser stack are vertical. The beams of two lasers are incident on the plate polarizer, one transmits through it, and the other is reflected on it. Finally, two beams combine to one. Polarization coupling of two bars increases the power by a factor of 1.6, and the output power is 2500 W, electro optical conversion efficiency is more than 48%. The spot size is about2 mm x 2 mm. This laser can be directly applied to cladding, surface hardening and other fields.
更多查看译文
关键词
diode Laser,high beam quality,high power,polarization beam coupling
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要