Rapid Hydrothermal Preparation of Rutile TiO 2 Nanoparticles by Simultaneous Transformation of Primary Brookite and Anatase: An in Situ Synchrotron PXRD Study
Crystal Growth & Design(2012)
Abstract
The formation mechanism and crystal growth of TiO2 in high-temperature high-pressure fluids were studied using HCl or H2SO4 as additives. In situ synchrotron radiation powder X-ray diffraction reveals that phase-pure rutile TiO2 nanoparticles can be formed using HCl as additive, whereas phase-pure anatase TiO2 is obtained when H2SO4 is used as additive. The supercritical (or near-critical) conditions provide a fast, one-step synthesis of rutile TiO2 nanoparticles and when using a 1:1 volume ratio of isopropanol-water as solvent at a temperature of 300 degrees C and a pressure of 25 MPa particles with an average particle size of about 22 nm are obtained in 20 min. A detailed analysis by sequential Rietveld refinements shows that the formation of rutile TiO2 occurs by a combined transformation of anatase and brookite TiO2. Analysis of the unit cell dimensions of the nanoparticles shows a lattice expansion with decreasing particle size for anatase prepared with H2SO4 medium and this may explain the stability of anatase particles that are significantly larger than their critical size.
MoreTranslated text
Key words
rapid hydrothermal preparation,rutile preparation,primary brookite,nanoparticles,anatase
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined