A comparison of GOCE gravitational models with EGM2008

Four new gravity field models from GOCE, two of them combined with GRACE, are compared here with EGM2008. The objectives are to look into the differences in consecutive ranges of the spherical harmonic expansion globally as well as in selected geographical regions and in the regions of the various data sources used for EGM2008. In general, GOCE is able to contribute to improved global gravity models in the spherical harmonic range between 120 and 200 (and above). The agreement between EGM2008 and the GOCE models is very good in well-surveyed regions such as North America, Europe and Australia, with geoid RMS-differences on the order of 4-6 cm. In other regions, where the surface gravity data available for the development of EGM2008 were poor, such as South America, Africa, South-East Asia or China the RMS-differences are on a level of 30 cm. Here GOCE leads to a significant improvement. These findings are confirmed by the analysis of the areas of the various EGM2008 data sources. In the regions of the so-called "fill-in" data of EGM2008 RMS-geoid height differences are high. In Antarctica GOCE also gives important improvements in terms of spatial resolution and accuracy. In general, the agreement between EGM2008 and the GOCE-models up to degree and order (d/o) 200 is good, with a global (excluding the polar gaps of GOCE orbits, throughout) geoid difference RMS of 11 cm, in the ocean areas 8 cm and 20 cm in the continental areas. GOCE models are better suited for ocean circulation studies because no prior ocean information enters into the data reduction process, as it is the case when deducing gravity anomalies from an altimetric mean sea surface. On the other hand, the good consistency between GOCE-models and EGM2008 in ocean areas very likely indicates that the influence of ocean circulation information on EGM2008 is rather small. The four tested GOCE models behave similarly except at the highest latitudes where GOCE lacks data due to its orbit inclination of 96.5 degrees and some form of regularization which has to be applied. (C) 2013 Elsevier Ltd. All rights reserved.