Pulse height tests of a large diameter fast LaBr 3 :Ce scintillation detector

The pulse height response of a large diameter fast 100mm×100mm LaBr3:Ce detector was measured for 0.1–10MeV gamma-rays. The detector has a claimed time resolution of 608ps for 511keV gamma rays, but has relatively poor energy resolution due to the characteristics of its fast photomultiplier. The detector pulse height response was measured for gamma rays from cobalt, cesium, and bismuth radioisotope sources as well as prompt gamma rays from thermal neutron capture in water samples contaminated with mercury (3.1wt%), boron (2.5wt%), cadmium (0.25wt%), chromium (52wt%), and nickel (22wt%) compounds. The energy resolution of the detector was determined from full width at half maximum (FWHM) of element-characteristic gamma ray peaks in the pulse height spectrum associated with the element present in the contaminated water sample. The measured energy resolution of the 100mm×100mm detector varies from 12.7±0.2% to 1.9±0.1% for 0.1 to 10MeV gamma rays, respectively. The graph showing the energy resolution ΔE/E(%) versus 1/√Eγ was fitted with a linear function to study the detector light collection from the slope of the curve. The slope of the present 100mm×100mm detector is almost twice as large as the slope of a similar curve of previously published data for a 89mm×203mm LaBr3:Ce detector. This indicates almost two times poorer light collection in the 100mm×100mm detector as compared to the other detector.