谷歌浏览器插件
订阅小程序
在清言上使用

The Influences Of Vacuum Pressure And Gas Components On The Stability Of Gaas Photocathode

SELECTED PAPERS FROM CONFERENCES OF THE PHOTOELECTRONIC TECHNOLOGY COMMITTEE OF THE CHINESE SOCIETY OF ASTRONAUTICS 2014, PT II(2015)

引用 0|浏览4
暂无评分
摘要
The photocurrent attenuation of GaAs photocathode within one hour after activation under three different vacuum pressure (5x10(-9)Pa, 5x10(-8)Pa, 5x10(-7)Pa) were recorded by automatically activated monitor. The results show that: the photocurrent quickly descend in the beginning and then descend linearly at a low slope; the amplitude of the quickly descending area were 10%, 14.74% and 36% separately, with the respective slope of the linear descending area were -0.00653, -0.01132and -0.02. Three samples' gas components of H-2. CH4. CO. H2O. O-2. CO2 etc under the same vacuum pressure(5x10(-8)Pa) during photocurrent attenuation were collected by quadrupole mass spectrometer. By comparing the gas components content and the attenuation law of the photocurrent, it has been found that H2O and H(2)had a greater impact on the stability of GaAs photocathode in the ultra-high vacuum environment and H2O was the predominant effect. This paper has important guiding significance and reference value in studying the stability of GaAs photocathode and the improvement of semiconductor photocathode process.
更多
查看译文
关键词
GaAs photocathode,Photocurrent attenuation,Vacuum pressure,Gas components
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要