Modeling of Flow and Heat Transfer in a Molten Glass Mini-Film for High Temperature Heat Collection in a Falling-Film Solar Central Receiver

In concentrating solar power plants, there is a strong incentive to increase the collection temperature and the overall exergy efficiency of the system. Some molten glass mixtures are attractive working fluids for high temperature solar thermal heat collection because optimized glass mixtures can be more stable, less-toxic, and less-corrosive than, for example, molten salts at high temperatures ( >= 1000 degrees C). A specific phosphorous pentoxide glass mixture is considered in this study to explore its performance in a molten glass falling film central receiver design for collection of heat at conditions resulting in a mini-film with a thickness less than 3mm. In our falling molten glass thin film, the phosphate glass flow is treated as a laminar, Newtonian and gravity-driven flow over a slightly inclined flat plate using an explicit finite difference scheme to evaluate its heat transfer performance for a direct absorption receiver concept. One of the main challenges of modeling transport in the molten glass is the strong dependence of its viscosity on temperature. To incorporate this effect in our numerical analysis, a temperature-dependent viscosity model is used in the momentum equation to model the fluid behav-ior as it flows down the surface and is progressively heated. An exponential function is used to model the viscosity as it changes with temperature to properly fit the measured the viscosity data provided by Halotechnics. Also, a variable film thickness model analysis is implemented to treat the variation in film thickness that results from the viscosity variation with temperature. In order to avoid stability issues, the finite difference scheme is organized in terms of nondimensional parameters that include all important properties that govern the system. The results of our model indicate that thinning of the film as it flows over the heated surface enhances the heat transfer performance on the lower portion of the receiver system. The heat transfer coefficient increases instead of remaining constant ( as normally expected for fully developed laminar flows) on the lower portion of the heated surface. The results further indicate that using a thin mini-film of molten glass for solar thermal heat collection provides high heat transfer performance and enhances the exergy collection.