Removal of cyanobacteria by slow sand filtration for drinking water

Potential problems arising from the presence of cyanobacteria in water intended for human consumption have been reported by several researchers. Regarding water treatment plants, intact cells of cyanobacteria should be removed to avoid the release of cyanotoxins due to cell lysis. Water treatment techniques with different degrees of complexity can be employed but, whenever possible, the method of easiest installation, operation and maintenance should be selected, especially for non-industrialized countries and rural communities. In this context, research was carried out to evaluate the efficiency of slow sand filtration to treat water from Gaviao reservoir in the city of Pacatuba, Ceara, Brazil, which has exhibited phytoplankton density of approximately 10(5) cells/mL with a prevalence of cyanobacteria representing over 90% of total cells. The results have demonstrated that slow sand filtration can be used to achieve water purification that meets federal standards. However, it was established that filtration through beds of gravel (prefilter) before the slow sand filtration is essential. The removal of phytoplankton reached values of approximately 97% and the filter run duration was more than 70 days. Furthermore, the slow sand filter was very efficient in removing total coliforms, with removal of up to 99.98%.