Measurement Of Image Plane Illumination Uniformity Of Photoelectric Imaging System

The image plane illumination nonuniformity caused by optical system or detector will affect the detection precision of photoelectric imaging system, especially in image guidance, positioning and recognition. An image plane illumination uniformity measurement device was set up, which was characteristiced of high uniformity and wide dynamic range. The device was composed of an asymmetric integrating sphere, the image collection and processing system, as well as the electrical control system. The asymmetric integrating sphere had two different radius, which was respectively 800mm and 1000mm. The spectral region was (0.4 similar to 1.1) mu m, the illumination range was (1x10(-4)similar to 2x10(4))lx. The image collection and processing system had two different acquisition card, which were respectively used for analog and digital signals. The software can process for dynamic image or static image. The TracePro software was used to make a internal ray tracing of integrating sphere, the illumination uniformity at the export was simulated for the size of 330mmx230mm and Phi 100mm export, the results were respectively 97.95% and 98.33%. Then, an illuminometer was used to measure the actual illumination uniformity of integrating sphere, the result was shown the actual illumination uniformity was 98.8%. Finally, a visible photoelectric imaging system was tested, and three different uniformity indicators results were given.