Detection of Saline Groundwater Bodies between the Dead Sea and the Mediterranean Sea, Israel, Using the TDEM Method and Hydrochemical Parameters
Environmental Processes(2014)
Abstract
A Time Domain ElectroMagnetic (TDEM) survey coupled with hydrogeological information was carried out along the Be’er Sheva valley between the Mediterranean Sea and the Dead Sea base levels, aiming to obtain the subsurface distribution of the different fresh and saline water bodies. Hydrochemical considerations and previous TDEM results hinted that the previously accepted model of an upper fresh water body underlain by solely Dead Sea (R-type) brines in the east and C-type brines in the west does not match the actual observations. Thus, the suggested working hypothesis of additional intruding seawater from the Mediterranean Sea to the Dead Sea base level was checked by the TDEM method. The results, indeed, exhibit an upper high resistivity fresh water body, an underlying low resistivity brine body and a moderate resistivity body in between. The origin of this body is not uniquely determined based on the geophysical measurements alone. Analysis of borehole data testifies that hydrochemical parameters of the body cannot be solely interpreted as a mixture of the above two end members, but rather calls for an additional contribution of intruding seawater. The suggested configuration consists of an upper fresh water body flowing to both base levels in the west and the east. Underneath there is a saline body resulting from seawater intrusion reaching from the Mediterranean to the Dead Sea base level. At the bottom there is a third body of the westward density driven Dead Sea brine. The entire configuration is supported by results of subsurface flow modeling.
MoreTranslated text
Key words
Seawater intrusion, Endorheic base levels, TDEM, Geochemistry
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined