Synthesis of In 2 O 3 hollow nanofibers and their application in highly sensitive detection of acetone
CERAMICS INTERNATIONAL(2015)
摘要
In this study, indium oxide (In2O3) hollow nanofibers were synthesized through a two-step process. In2O3 solid nanofibers were prepared by electrospinning, and 10% HNO3 was used to corrode these nanofibers to obtain In2O3 hollow nanofibers. Moreover, the effects of corrosion on the morphology and acetone-sensing properties of In2O3 nanofibers were investigated. In2O3 nanofibers that were corroded for 2 h displayed hollow structures and exhibited a high response (resistance ratio) of 151 to 5 ppm of acetone at 300 degrees C. The minimum detection limit was 20 ppb. The hollow In2O3 nanofibers also exhibited high selectivity to acetone along with negligible cross-responses to interference gases at 300 degrees C, These gases include NO2, H-2, CO, benzene, p-xylene, and toluene. The strong response to acetone was attributed to the enhanced accessibility of gas for gas-sensing reactions due to the hollow morphology. (C) 2015 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
更多查看译文
关键词
Acetone,Gas sensors,In2O3,Hollow,Nanofibers
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要