Recovery of molybdenum, nickel and cobalt by precipitation from the acidic leachate of a mineral sludge.

The objective of this study was to investigate the recovery potential of molybdenum (Mo), nickel (Ni) and cobalt (Co) from synthetic and real acidic leachate of a mineral sludge from a metal recycling plant by sulfide precipitation. The operational parameters (metal sulfide (M/S) ratio 0.1-1, agitation speed 0-100 rpm, contact time 15-120 min and pH 1-5) were optimized in batch conditions on synthetic metal leachate (0.5 M HNO3, Mo = 101.6 mg L-1, Ni = 70.8 mg L-1, Co = 27.1 mg L-1) with a 0.1 M Na2S solution. Additionally, recovery of the target metals was theoretically simulated with a chemical equilibrium model (Visual MINTEQ 3.0). The optimized Na2S precipitation of metals from the synthetic leachate resulted in the potential selective recovery of Mo at pH 1 (98% by modeling, 95% experimental), after simultaneous precipitation of Ni and Co as sulfide at pH 4 (100% by modeling, 98% experimental). Metal precipitation from the real leachate (18 M H2SO4, Mo = 10,160 mg L-1, Ni = 7,080 mg L-1, Co = 2,710 mg L-1) was performed with 1 M Na2S, and resulted in a maximal Mo recovery at pH 2 (50%), while maximal recoveries of Ni and Co were observed at pH 4 (56% and 60%, respectively). Real leachate gave a lower metals recovery efficiency compared with synthetic leachate, which can be attributed to changes in the pH, nature of leachant, co-precipitation of Zn and competition for S2- ions. [GRAPHICS] .