The accuracy of conventional 2D video for quantifying upper limb kinematics in repetitive motion occupational tasks.

Marker-less 2D video tracking was studied as a practical means to measure upper limb kinematics for ergonomics evaluations. Hand activity level (HAL) can be estimated from speed and duty cycle. Accuracy was measured using a cross-correlation template-matching algorithm for tracking a region of interest on the upper extremities. Ten participants performed a paced load transfer task while varying HAL (2, 4, and 5) and load (2.2 N, 8.9 N and 17.8 N). Speed and acceleration measured from 2D video were compared against ground truth measurements using 3D infrared motion capture. The median absolute difference between 2D video and 3D motion capture was 86.5mm/s for speed, and 591mm/s(2) for acceleration, and less than 93mm/s for speed and 656mm/s(2) for acceleration when camera pan and tilt were within 30 degrees. Single-camera 2D video had sufficient accuracy (<100mm/s) for evaluating HAL.Practitioner Summary: This study demonstrated that 2D video tracking had sufficient accuracy to measure HAL for ascertaining the American Conference of Government Industrial Hygienists Threshold Limit Value((R)) for repetitive motion when the camera is located within +/- 30 degrees off the plane of motion when compared against 3D motion capture for a simulated repetitive motion task.