Reconfigurable Ion Gating of 2H-MoTe2 Field-Effect Transistors Using Poly(ethylene oxide)-CsClO4 Solid Polymer Electrolyte.
ACS nano(2015)
Abstract
Transition metal dichalcogenides are relevant for electronic devices owing to their sizable band gaps and absence of dangling bonds on their surfaces. For device development, a controllable method for doping these materials is essential. In this paper, we demonstrate an electrostatic gating method using a solid polymer electrolyte, poly(ethylene oxide) and CsClO4, on exfoliated, multilayer 2H-MoTe2. The electrolyte enables the device to be efficiently reconfigured between n- and p-channel operation with ON/OFF ratios of approximately 5 decades. Sheet carrier densities as high as 1.6 × 10(13) cm(-2) can be achieved because of a large electric double layer capacitance (measured as 4 μF/cm(2)). Further, we show that an in-plane electric field can be used to establish a cation/anion transition region between source and drain, forming a p-n junction in the 2H-MoTe2 channel. This junction is locked in place by decreasing the temperature of the device below the glass transition temperature of the electrolyte. The ideality factor of the p-n junction is 2.3, suggesting that the junction is recombination dominated.
MoreTranslated text
Key words
electrostatic gating,field effect transistor,molybdenum ditelluride,poly(ethylene oxide),polymer electrolyte,p−n junction,transition metal dichalcogenides
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined