Influence of base-region thickness on the performance of Pnp transistor-VCSEL.

We have recently reported a 980nm GaAs-based three terminal Pnp transistor-vertical-cavity surface-emitting laser (TVCSEL) operating at room temperature with optical power up to 1.8mW. However, the current gain beta = Delta I-c/Delta I-b was near zero just before lasing and became negative after the lasing threshold. The main cause of the negative current gain was found to be a gradual and position-dependent forward-biasing (saturation) of the base-collector junction with increasing bias even before lasing threshold. In this article, detailed multi-physics device simulations are performed to better understand the device physics, and find ways to avoid the premature saturation of the base-collector junction. We have optimized the thickness of the base region as well as its doping concentration and the location of the quantum wells to ensure that the T-VCSEL is in the active mode throughout its range of operation. That is, the emitter-base junction is forward biased and base-collector junction is reversed biased for sweeping the excess charges out of the base region. (C) 2014 Optical Society of America