A combinatorial chemistry method for fast screening of perovskite-based NO oxidation catalyst.

A fast parallel screening method based on combinatorial chemistry (combichem) has been developed and applied in the screening tests of perovskite-based oxide (PBO) catalysts for NO oxidation to hit a promising PBO formulation for the oxidation of NO to NO2. This new method involves three consecutive steps: oxidation of NO to NO2 over a PBO catalyst, adsorption of NOx onto the PBO and K2O/Al2O3, and colorimetric assay of the NOx adsorbed thereon. The combichem experimental data have been used for determining the oxidation activity of NO over PBO catalysts as well as three critical parameters, such as the adsorption efficiency of K2O/Al2O3 for NO2 (α) and NO (β), and the time-average fraction of NO included in the NOx feed stream (ξ). The results demonstrated that the amounts of NO2 produced over PBO catalysts by the combichem method under transient conditions correlate well with those from a conventional packed-bed reactor under steady-state conditions. Among the PBO formulations examined, La0.5Ag0.5MnO3 has been identified as the best chemical formulation for oxidation of NO to NO2 by the present combichem method and also confirmed by the conventional packed-bed reactor tests. The superior efficiency of the combichem method for high-throughput catalyst screening test validated in this study is particularly suitable for saving the time and resources required in developing a new formulation of PBO catalyst whose chemical composition may have an enormous number of possible variations.