National validation study of a cellulose sponge wipe-processing method for use after sampling Bacillus anthracis spores from surfaces.
APPLIED AND ENVIRONMENTAL MICROBIOLOGY(2011)
Abstract
This work was initiated to address the gaps identified by Congress regarding validated biothreat environmental sampling and processing methods. Nine Laboratory Response Network-affiliated laboratories participated in a validation study of a cellulose sponge wipe-processing protocol for the recovery, detection, and quantification of viable Bacillus anthracis Sterne spores from steel surfaces. Steel coupons (645.16 cm(2)) were inoculated with 1 to 4 log(10) spores and then sampled with cellulose sponges (Sponge-Stick; 3M, St. Paul, MN). Surrogate dust and background organisms were added to the sponges to mimic environmental conditions. Labs processed the sponges according to the provided protocol. Sensitivity, specificity, and mean percent recovery (%R), between-lab variability, within-lab variability, and total percent coefficient of variation were calculated. The mean %R (standard error) of spores from the surface was 32.4 (4.4), 24.4 (2.8), and 30.1 (2.3) for the 1-, 2-, and 4-log(10) inoculum levels, respectively. Sensitivities for colony counts were 84.1%, 100%, and 100% for the 1-, 2-, and 4-log(10) inocula, respectively. These data help to characterize the variability of the processing method and thereby enhance confidence in the interpretation of the results of environmental sampling conducted during a B. anthracis contamination investigation.
MoreTranslated text
Key words
environmental microbiology
AI Read Science
Must-Reading Tree
Example
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined