High-peak and high-average power rectangular pulse generator

Voronin, V.V.,Tananakin, V.A.,Pavlov, S.S.,Tsiberev, V.P.

Pulsed Power Conference, 1997. Digest of Technical Papers. 1997 11th IEEE International（1997）

引用 3|浏览4

暂无评分

摘要

A modular high-voltage device, forming in its load electric pulses with amplitudes of 100-200 kV, current 400-800 kA and duration 20 ns is described. The device is intended for the generation of Bremsstrahlung pulses. The device is made on the basis of four generators of GIIR-4/sup 1/ type. Their high accuracy of triggering allows synchronous module operation. The load of the GIIR-4 is either 42 high-voltage cables of KVI-300 type, or a transforming line with a transformation coefficient of 2. The peculiarity of the module is the simultaneous joint charging of the GIIR-4 forming lines and the HV synchronization block from one Marx generator. This allowed an increase in the reliability of device operation and repetition rates up to 20 Hz. Data on module experiments and data concerning the operation resources of the mostly electric strength device units are also presented.

查看译文

关键词

load (electric),power capacitors,power supplies to apparatus,pulse generators,pulsed power technology,100 to 200 kV,20 Hz,20 ns,400 to 800 kA,Bremsstrahlung pulse generation,GIIR-4 forming lines,HV synchronization block,Marx generator,electric load,pulsed power supplies,rectangular pulsed power generator,repetition rate,simultaneous joint charging,synchronous module operation,triggering,

AI 理解论文

溯源树

样例

生成溯源树，研究论文发展脉络

Chat Paper

正在生成论文摘要