Full-polarimetric GPR system for underground targets measurement

Ground Penetrating Radar(2014)

引用 3|浏览9
暂无评分
摘要
A conventional GPR system includes PC, network analyzer, rectangular coordinates robot and a single antenna for transmission and reception, resulting in a response only to Co-Polarization signal. However, we expect that more polarimetric information can be obtained. So we developed a full-polarimetric GPR system including PC, network analyzer, position controller, switch driver and polarimetric antenna array. This antenna array can obtain CMP multi-offset data gather directly. At every measurement position, the total of three signals was collected not only in Co-Polarimetric mode but also in Cross-Polarimetric mode. Two groups of experiments have been presented. The first group is concerned with a metal dihedral which is made of two orthogonal conducting plates and a metal trihedral as the targets. The result of this experiment shows that the surface morphology of the target characteristics, the relative position and attitude have a certain influence on the measurement results. The second group is using a metal trihedral as the target. The results of experiment are shown in this presentation are consistent with the theoretical values and helps us to identify target attributes such as direction.
更多
查看译文
关键词
antenna arrays,ground penetrating radar,network analysers,surface morphology,CMP multioffset data,conventional GPR system,copolarimetric mode,copolarization signal,cross-polarimetric mode,full polarimetric GPR system,metal dihedral,network analyzer,orthogonal conducting plates,polarimetric antenna array,polarimetric information,position controller,rectangular coordinates robot,surface morphology,switch driver,underground targets measurement,Common midpoint (CMP) antenna array,GPR system,Polarimetric
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要