Nuc Correction Of Ir Fpa And Error Analysis With Fpga
INTERNATIONAL SYMPOSIUM ON PHOTOELECTRONIC DETECTION AND IMAGING 2007: PHOTOELECTRONIC IMAGING AND DETECTION(2008)
Abstract
Infrared camera with IR FPA (Focal Plane Array) has often been used in the fields of target detection, temperature test, surface detection, and so on. And it is very important to run the Non Uniformity Correction (NUC) correction firstly to solve the non-uniformity of FPA which is the inherent character of IR FPA. The NUC character is the inherent performance of IR FPA which has different response rate among pixels for the same IR radiant. This NUC can decrease sensitivity of IR FPA and reduce the resolution of sensor. There are two kinds of methods to do this correction. One is hardware method which is using the DSP. Another one is software method. Within this device, two-point correction method is used to correct the NUC. The Field Programmable Gate Array (FPGA) is used. The FPGA can do better parallel arithmetic and has more programmability. After the NUC correction, the error analysis of this correction is also made. After the correction, the BPR (Bad Pixel Replacement) can be more than 98%.
MoreTranslated text
Key words
IR FPA,NUC,FPGA,error analysis
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined