A steel pressure sensor based on micro-fused glass frit technology
Electronic Packaging Technology and High Density Packaging(2012)
摘要
In this paper, we propose a pressure sensor using strain gages bonded on 17-4PH stainless steel (SS) diaphragm based on micro-fused glass frit technology. The strain gages with uniform resistance are obtained by growing an epi-silicon layer on a single crystal silicon wafer using epitaxial deposition technique rather than conventional photolithography and etching techniques. The inorganic micro-fused glass frits are used as the bonding material between the strain gages and the 17-4PH SS diaphragm. Compared to organic adhesives, the glass frits bonding material can minimize the hysteresis error in the high temperature applications and improve the mechanical properties of semiconductor strain gage based pressure transducers. After wire bonds being made between the two half bridge strain gages and an interface printed circuit board (PCB), the output characteristics of sensors are evaluated. Results show that the sensors exhibit a stable output with 0.045% full-scale (FS) hysteresis error, and linearity and repeatability are less than 0.04% FS 0.12% FS at the room temperature. Furthermore, the output performance of sensors in the high temperature of 125 °C almost equals that of the room temperature, which indicates that the glass frit bonding is a good method which would lead to a significant advance in the high temperature applicability of silicon strain gage transducers.
更多查看译文
关键词
silicon strain gage transducers,glass frit bonding material,epi-silicon layer,pressure transducers,temperature 125 degc,inorganic microfused glass frit technology,strain gauges,etching techniques,organic adhesives,pressure sensors,photolithography techniques,single crystal silicon wafer,epitaxial deposition technique,17-4ph stainless steel diaphragm,bonding material,interface printed circuit board,semiconductor strain gage mechanical properties,silicon,fs hysteresis error,printed circuits,si,temperature 293 k to 298 k,stainless steel,half bridge strain gages,steel pressure sensor,full-scale hysteresis error,interface pcb,17-4ph ss diaphragm
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要