The design of the assembly tools for the ITER tokamak

The conceptual design of the purpose-built assembly tools required for ITER tokamak assembly is given. The ITER machine assembly is sub-divided into five major activities: lower cryostat, sector sub-assembly, sector assembly, ex-vessel, and in-vessel [1]. The core components, vacuum vessel (VV) and toroidal field coil (TFC), are assembled from nine 40° sub-assemblies, each comprising a 40° VV sector, two TFCs, and the associated VV thermal shield (VVTS). The lower cryostat activities must be completed prior to sector assembly in pit to prepare the foundations for the core components, and to locate the lower components to be trapped once the core components installation begins. In-vessel and ex-vessel activities follow completion of sector assembly. To perform these assembly activities requires both massive, purpose-built tools, and standard heavy handling and support tools. The tools have the capability of supporting and adjusting the largest of the ITER components; with maximum linear dimension 19m and mass 1200tonne, with a precision in the low mm range. Conceptual designs for these tools have been elaborated with the collaboration of the Korean Domestic Agency (KO DA). The structural analysis was performed as well using ANSYS code.