Study on catalytic oxidation of organic micro-pollutants in source water enhanced by water-lifting aerator
Chinese Journal of Environmental Engineering(2012)
Abstract
The supported catalysts RuO2-CeO2/γ-Al2O3, Fe2O3-CeO2/γ-Al2O3, Fe2O3/γ-Al2O3 were prepared by consecutive impregnation in which γ-Al2O3 was used as carrier. The catalysts were applied to treat organic micro-pollutants in source water from a reservoir in Xi'an under conditions of water lifting and aeration. No obvious inactivity phenomenon was found, even if the catalysts were constantly used for 20 days to eliminate effect of pure adsorption, 38% of UV254, 28% of CODMn and 27% of TOC can be removed in 7 days. The result of leaching ions tests shows the catalyst Fe2O3/γ-Al2O3 has an excellent stability, thus it was chosen as optimum catalyst considering treatment effect, preparing process and preparing cost. Then the roasting temperature, roasting time, and dipping solution concentration were investigated to optimize preparing process of Fe2O3/γ-Al2O3.
MoreTranslated text
Key words
water quality,iron compounds,ruthenium compounds,consecutive impregnation,oxidation,catalytic oxidation,micro-pollutants,fe2o3-ceo2-al2o3,water source,source water,ruo2-ceo2-al2o3,xi'an reservoir,pure adsorption effect,water-lifting aerator,catalysts,organic micropollutant treatment,raw water quality improvement,catalysis,cerium compounds,aluminium compounds,water pollution control,water lifting and aeration,fe2o3-al2o3
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined