A Comparison between Extractant Solvents in the Quantitative Analysis of Total Petroleum Hydrocarbons in Soil Samples.
JOURNAL OF THE JAPAN PETROLEUM INSTITUTE(2003)
Abstract
Any given method for the analysis of semi-volatile total petroleum hydrocarbons (TPH, C-10-C-36) in contaminated soil is made up of a number of procedures, each of which may be subject to improvement or optimization. One such procedure involves the extraction of TPH from soil samples using an appropriate solvent. A solvent that is widely used is dichloromethane (DCM). Ideally, the chosen solvent should represent the best compromise between factors such as cost, extraction efficiency and occupational health and safety concerns. We have initiated a search for alternatives to neat DCM which are equally efficient at solubilising TPH over a range of soil. types, but which are less expensive to purchase and dispose of, and which are less toxic. Two studies were carried out involving the analysis of TPH levels in a total of 78 field samples, from a number of contaminated sites. For Study 1, TPH levels were determined for 36 samples (from five different sites), comparing the use of neat DCM versus 50%v/v DCM/acetone as extractant solvents. For Study 2, TPH levels were determined for 42 samples (from one site), comparing the use of 50%v/v DCM/acetone versus neat 2-propanol as extractant Solvents. Apart from varying the extractant solvent, all other aspects of the method were kept constant. The soils were characterized for all samples, and the six sites were found to have similar moisture content and soil type distributions. Levels of TPH in the extracts were determined by gas chromatography with flame ionization detection (GC/FID) and, using the paired t-test, were statistically compared between each of the two pairs of extractant solvents used. These investigations suggest that for routine field samples, and for sites of the type represented here, 50%v/v DCM/acetone may be confidently substituted for neat DCM as an extractant solvent. However, 2-propanol is not recommended as a substitute for either 50% DCM/acetone or DCM.
MoreTranslated text
Key words
total petroleum hydrocarbon,contaminated soil,extractant solvent,dichloromethane,acetone,2-propanol
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined