Angular-Dependence Of Quartz Fiber Calorimeter Response

G Anzivino,Y Chamorovskii,A Contin,M Danilov,G Dellacasa,R Desalvo, V Gavrilov,A Golutvin,P Gorodetzky,Jm Helleboid, V Isaev,Kf Johnson,P Juillot,S Kuleshov,G Lacommare,D Lazic,D Litvintsev,M Lundin, M Marino,A Musso,F Ratnikov,V Rusinov, V Stolin,M Vinogradov

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT（1995）

Cited 15|Views16

No score

Abstract

A small quartz fiber calorimeter prototype with copper absorber has been assembled and tested at ITEP as a first test of a ''0 degree'' component of the RD-40 R&D program. Calibration and monitoring of each tower response was performed using the positions of single photoelectron peaks as well as the response to minimum ionizing particles incident at an angle of 45 degrees. The response of the prototype to 4 GeV electrons as a function of beam angle with respect to the quartz fibers was studied in the range from 0 degrees to 90 degrees. The test results are compared to the GEANT based Monte Carlo (MC) simulations.

Translated text

AI Read Science

Must-Reading Tree

Example

Generate MRT to find the research sequence of this paper

Chat Paper

Summary is being generated by the instructions you defined