An operational model to simulate post-accidental radionuclide transfers in Toulon marine area: preliminary development
Ocean Dynamics(2011)
Abstract
As part of its development of post-accident management tools, the French Institute for Radiological Protection and Nuclear Safety is setting up a model to simulate radionuclide dispersion in the Toulon marine area (one of France’s main military ports). The model is based on the MARS 3D code developed by IFREMER. It reproduces hydro-sedimentation phenomena in the Bay of Toulon with a horizontal spatial resolution of 100 m and 30 vertical sigma levels and also factors in radioactive decay and dissolved/particulate distribution of the radionuclides studied. With no tide, the major currents in this area are generated by the wind. The model effectively reproduces the resulting hydrodynamic phenomena, which were measured throughout the summer of 2009 in the channel that links the Little Bay to the Large Bay of Toulon. When the Mistral (wind from the West/Northwest) blows, a surface current quickly appears, which pushes water southwards from the Little Bay, and which is offset by a bottom current (upwellings). When the wind blows from the East, the currents move in the opposite direction, and southeasterly waves, dependent on wind strength and fetch, occur in the Large Bay. Here, we give an example of the simulated dispersion of radionuclides released directly into the surface waters near the Arsenal, demonstrating the constraint relative to dispersion generated by the half-closed configuration of the Little Bay. Sediment in the Little Bay also forms an area where the most highly reactive radionuclides would accumulate, and where the lack of waves has the effect of considerably limiting the phenomena of resuspension.
MoreTranslated text
Key words
bay of toulon . radionuclides . dispersion . mars
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined