Caractérisation de l'état de surface et des contraintes résiduelles engendrées par meulage

grinding operations are generally used to prepare surfaces or improve surface state before or after welding. These operations, when carried out manually with portable machines, induce superficial work hardening, modification of the structure of material and residual stresses. An experimental study about the influence of grinding has been carried out on two metallic materials, a low carbon steel (A42-CP) and an austenitic stainless steel (316L), in order to characterise the grinding effects. Manual grinding being difficult to control (no repeatable effects), a test rig using a portable machine has been made. This test rig enables to control the grinding parameters in order to obtain repeatable grinding operations. Characterisation of the ground surfaces was made by 2D profilometry and measurements of residual stresses have been carried out with a Set-X Elphyse apparatus. The profiles of residual stresses obtained show, on the one hand, that on each material, identical grindings generate identical states of stresses and on the other hand, that materials have not the same behaviour. From a metallurgical point of view, we also observe that the grinding effects are different for both materials. The grinding of the A42 steel highlights a crushing of the grain near the surface while the 316L stainless steel grinding reveals sliding bands.