基本信息
views: 0
![](https://originalfileserver.aminer.cn/sys/aminer/icon/show-trajectory.png)
Bio
Branislav Đorđević was born 11 June 1988 in the city of Smederevo, where he finished elementary and high school. After that, he finished B. Sc. study at Faculty of Mechanical Engineering, University of Belgrade (2009-2012), as well as M.Sc. at Faculty of Mechanical Engineering, University of Belgrade (2012-2014), specialization area "Welding and welded structures". Branislav Đorđević got Ph.D. degree at the Faculty of Mechanical Engineering, University of Belgrade, in June 2021 The title of his Ph.D. thesis was "Toughness of the ferritic reactor steel in transition temperature region". The topic and the results of this research were presented in prestige journals with high IF. From February 2022 he is holding position of scientific associate.
In the period from November 2015 till June 2016 he worked as associate and constructor of laboratory equipment for biomedical applications and testing, composition of reports and tests procedures in BioIRC – Bioengineering Researh and Development Center from Kragujevac (part of project SIFEM (FP7)). The project was under supervision of Nenad Filipović, Ph.D. Full professor in Kragujevac.
From July 2016 he was engaged in Innovation Center of Faculty of Mechanical Engineering (ICMF), University of Belgrade as an associate on the project of the Ministry of Education, Science and Technological Development of the Republic of Serbia, TR35011 "The integrity of the pressure equipment with the simultaneous action of fatigue load and temperature" (2016-end of 2019) under supervision of prof. dr Ljubica Milović, and project Contract No. 451-03-68/2020-14/200213 (2020-end of 2022) and Contract No. 451-03-47/2023-01/200213 (2023).
During his engagement in ICMF, he was engaged as well as teaching assistant / technical support / associate during audio/video recording of teaching modules, technical support for material preparation, quality assurance of recording etc. (project financed by SGM Berlin), under supervision of Aleksandar Sedmak, Ph.D. emeritus. He was engaged as teaching associate on the modules Fundamentals of machine design, Machine design M, Machine Element 1 and Machine Element 2 on the Faculty of Mechanical Engineering.
From the April 2019 till November 2022, Branislav Đorđević had an engagement (on contract) in Inspection Body of IMCF, holding the position of Quality Manager / Quality Assurance / Quality Control Inspector. He poses as well IWE/EWE certificates.
In the summer semester of 2019/20 and 2020/21 he worked as associate (on contract) on the Faculty of Transport and Traffic Engineering on module Mechanic 1.
He is an author and co-author of over 80 scientific papers in the fields of mechanical engineering, specific in the area such as: characterization of material in transition temperature region, integrity of pressure vessels equipment and their repairing, integrity and reliability assessment of constructions, material selection and analysis of behavior in exploitation service, analysis and testing of welded joints, analysis and numerical simulation of working conditions of mechanical structures, damage analysis and proposals for its prevention, numerical summation of machine constructions and assemblies etc. Some of the papers have been published in prestigious scientific journals, presented at conferences and other scientific seminars (beside Serbia) in Italy, Portugal, Greece, Algeria, Hungary, Romania, Slovakia, Bosna and Herzegovina etc.
He was:
- member of organization committee of following international conferences: NT2F14, TEAM 2015, NANT 2015, ECF22 conference 2018; VECF1; IRAS 2023.
- secretary of IRAS 2023.
- member of scientific committee of international conferencse IRAS2023 and ISCAME 2023.
- guest editor of SI Procedia Structural integrity (Vol. 48).
- guest editor of SI International Journal of Structural Integrity (SI title: Innovative methods for structural integrity and reliability assessment and material characterisation under environmental effect)
Research Interests
Papers共 15 篇Author StatisticsCo-AuthorSimilar Experts
By YearBy Citation主题筛选期刊级别筛选合作者筛选合作机构筛选
时间
引用量
主题
期刊级别
合作者
合作机构
Procedia Structural Integrity (2023): 27-32
ENGINEERING FRACTURE MECHANICS (2023): 109716-109716
STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJAno. 2 (2023): 105-110
Cited0Views0Bibtex
0
0
Procedia Structural Integrity (2022): 362-367
Procedia Structural Integrity (2022): 88-95
Ana Maksimovic,Ljubica Milovic,Bojana Zecevic,Branislav Djordjevic, Srdjan Bulatovic,Vujadin Aleksic
Procedia Structural Integrity (2022): 1361-1368
Procedia structural integrity (2021): 781-787
Load More
Author Statistics
Co-Author
Co-Institution
D-Core
- 合作者
- 学生
- 导师
Data Disclaimer
The page data are from open Internet sources, cooperative publishers and automatic analysis results through AI technology. We do not make any commitments and guarantees for the validity, accuracy, correctness, reliability, completeness and timeliness of the page data. If you have any questions, please contact us by email: report@aminer.cn